A lazy day in the pool wouldn't be complete without a cold summer beverage in your hand. Stop wasting time running inside for cold drinks and make a floating beverage boat. Not only will it impress your pool party guests, it is sure to maximize your fun in the sun.
Things You\’ll Need
-
Plastic bin
-
Tape measure
-
Marker
-
Pool noodle
-
Box cutter
-
Plastic rope (thin enough to thread through the pool noodle)
-
Lighter or matches
-
Glue gun (optional)
-
Silk lei (optional)
Step 1: Measure the Bin
Use the tape measure to measure the length and width of the plastic bin. Subtract 2 inches from each of these measurements.
Step 2: Measure the Noodle
Measure and mark the new length and width of the bin on the pool noodle with a marker. You will need to mark four pieces on the noodle, two for the length of the plastic bin and two for the width. For example, if the length of the plastic bin measured 12 inches, mark two 10-inch portions on the pool noodle.
Step 3: Cut the Noodle
Use the box cutter to cut the noodle on the marks you made.
Warning
Use caution when using the box cutter.
Tip
If the plastic bin is extra thick, a cordless drill may be needed to create the holes.
Step 4: Thread Rope Through the Noodle
Thread one end of the rope through one pool noodle piece and place it next to the corresponding side of the bin.
Step 5: Tie a Knot
After the rope has been threaded throughout all of the noodle pieces and holes, pull the rope tight so the pieces are snug against the plastic bin. Tie the loose ends of the rope together and cut off any excess rope.
Tip
Hold a lighter or match to the knot for a few seconds to melt the rope together. This will prevent fraying and ensure the knot does not come undone.
Step 6: Decorate the Beverage Boat
Use a glue gun to add any finishing decorations to the floating beverage boat such as a silk lei. Avoid using decorations that will be damaged when they get wet.
Warning
Use caution when using a hot glue gun. Avoid getting hot glue on skin.
Step 7: Use the Floating Beverage Boat
Fill the bottom of the beverage boat with ice. Place your favorite drinks inside the boat and gently place it in the pool.
Warning
Use caution if you are putting glass bottles in the beverage boat. If the bottles break in the pool, they could hurt someone or damage the pool.
